Anti riot suit

FBF-B-JSJ01 anti riot suit

Product description: FBF-B-JSJ01 anti riot suit
INQUIRY

1. Comply with the relevant standards of GA420-2008 Anti-riot Service;
2. The front chest and back protection layer are made of 2.0mm thick aluminum alloy mosaic layer, engineering plastic molding armor and soft energy absorbing material. The protective layer of the limbs is made of reinforced nylon material forming armor and soft energy absorbing material. 2.0mm thick integral aluminum alloy plate and soft energy absorbing material;
3. Total mass: 7.18kg;
4, protective area: front chest and ankle ≥ 0.10m2; back ≥ 0.10m2; upper limb ≥ 0.18m2; lower limb ≥ 0.30m2;
5, stab resistance: the front chest of the anti-riot suit, the back and the front (excluding the seam) with the standard test tool specified by GA68, with 20J kinetic energy to penetrate the protective part vertically, the tip should not penetrate.
6. Impact resistance: Place any protective part of the explosion-proof suit on the rigid plane and impact it with 120J energy. The corresponding parts should not be damaged or cracked.
7, hit the energy absorption performance: the anti-riot clothing front chest, the back back position is placed on the standard clay, respectively, with 100J energy impact, the glue indentation depth <14.5mm.
8. Flame retardant performance: The afterburning time of the surface of the protective component after burning is <10s.